BC 417143 藍芽模組
單一晶片,無線電和基頻IC,用於2.4GHz的藍牙,合格的藍牙v2.0+EDR，增強型數據速率（EDR）符合規範v2.0.E.2
1. Features :
(1) A single chip radio and baseband IC for Bluetooth 2.4GHz
(2) Fully Qualified Bluetooth v2.0+EDR,Enhanced Data Rate(EDR) compliant with v2.0.E.2 of specification for both 2Mbps and 3Mbps modulation modes.
(3) Integrated 15-bit Linear 8KHz Sample Frequency Audio CODEC in one chip
(4) Full Speed Bluetooth Operation with Full Piconet
(5) Standard HCI(UART or USB)
(6) Multi-configurable I2S, PCM or SPDIF Interface
(7) Support for 802.11 Co-Existence
(8) UART interface with programmable baud rate,Maximum baud rate:3686400bpsScatternet Suppor
(9) RoHS Compliant
(10) Industrial design
(11) Secure authentication, data encryption
(12) Built-in PCB RF antenna
(13) Support DFU software upgrades
(14) Support connecting seven different devices
(15) Supports both USB and UART interface
(16) Supports SPI programming interface
(17) Supports PCM audio input and output interface
(18) Low-voltage power supply, 2.7V to 3.6V
(19) Built-in 8Mbit Flash
(20) The same power level point transmission distance up to more than 10 m
(21) Support low power modes: Park, Sniff, Hold and Deep Sleep
(22) Supports A2DP, AVRCP, PBAP, DUN, FTP, HF1.5, HID, OPP, PAN, SPP and other Bluetooth Application Specification
2. Application :
(1) CF card, USB , PCMCIA , RS232 adaptor for Computer.
(2) Bluetooth network
(3) Bluetooth RS232/485
(4) Industry control
(5) Bluetooth printer
(6) Bluetooth joystick
(7) Bluetooth remote control
(8) Bluetooth NFC reader
(9) Bluetooth microphone, Bluetooth stereo
(10) Close Bluetooth data transmission, wireless data collection
(11) Bluetooth headsets, handheld devices
(12) Bluetooth mouse, Bluetooth keyboard
(13) Bluetooth joystick, bluetooth game hand lever
(14) Digital cameras, cameras
(15) Personal Digital Assistant
(16) Micro Bluetooth printer
(17) Bluetooth Counter
(18) Bluetooth Remote Control Toys
(19) Bluetooth wireless telephone
(20) Bluetooth GPS Receiver Wireless Instrumentation
(21) Wireless Industrial Control
(22) Bluetooth Wireless Barcode Scanner
3. Pin Distributed :
4. Pin Definition :
5. Appearance and dimensions :
6. PCB package size :
7. Electrical Characteristics :
-
最新洽詢
-
尋找 藍芽模組維修
(陳*嘉) -
藍芽模組詢價
(吳*儀) -
25kV屋外型終端電纜頭
(聯**技)#電纜#電子#通訊 -
歷屆私中入學考題
(鍾*生) -
關於啞光電鍍產品的諮詢
(孫*祥)#ic#ti#ro#ac
貿登興業
規格型號 : YTX12-BS(同GTX12-BS)電池容量 : 10.5 Ah / 20HR冷啟動電流 :180 CC
貿登興業產品
-
NFC Tag R0919
NFC,近距離無線通訊,允許電子設備之間進行非接觸式點對點資料傳輸，在十公分（3.9英吋）內交換資料。 -
JBM-BL4 藍芽模組
支援藍牙4.0標準協定的雙模藍牙模組，同時支援BT3.0 Classic以及BT4.0 BLE模式。可廣泛用於同時支援Android勻iOS作業系統的應用。 -
JBA-855 藍芽模組
合格的藍牙v2.1+ EDR、7dBm的發射功率和-90dBm工作的接收靈敏度、電源自動進入配對模式，並斷開、4功能按鈕、2 LED指示、I-PEX天線連接 -
JBA-80 藍芽模組
支持A2DP1.2，AVRCP1.0、9dBm發射功率和-92dBm電源接收靈敏度、I-PEX天線連接、自動進入配對模式語音提示、3W D類音頻功率放大器 -
JBA-90 藍芽模組
支持HSP/HFP，A2DP，AVRCP模式、TWS(無線立體聲)、7dBm發射功率和-90dBm接收靈敏度、I-PEX天線連接、3W D類音頻功率放大器 -
BC6145 藍牙模組 M93-45A
BC6145的藍牙模組、低功耗1.8V操作、整合的開關模式穩壓器、15單位線性音頻編解碼器、支持藍牙3.0和A2DP -
JBM-83 藍芽模組
藍牙的操作與微網和散射支持、藍牙低功耗（BLE）、發射器+7.5 dBm的藍牙LE最大TX輸出功率、 接收器-92dBm以下藍牙LE接收靈敏度 -
BTM-800 藍芽模組
藍牙V4.0立體聲模組、高效率開關模式穩壓器直接從電池供電的1.8V和1.35V輸出、內部ROM，串行閃存和EEPROM接口、支持智能手機應用程序（應用程序） -
JBA-850 藍芽 PCBA
立體聲藍芽模組、A2DP1.2型材、電源開啟後自動進入配對模式、16級音量控制、I-PEX天線連接 -
JBM-870 藍芽模組
支持A2DP1.2型材、電源開啟自動進入配對模式、配對連接語音提示、16W D類音頻功率放大器